Quel type de tête de lavage recommandez-vous pour des cuves avec des salissures tenaces et une haute température ?

NEW
HIGH IMPA CT TANK
CLEANING MACHINE
MESHCLEA N+
Series 5T5

GENERAL INDUSTRY

 High impact tank cleaning machine
MeshClean+
Series 5T5
Features:
• High efficiency thanks to especially
powerful solid jet nozzles
• Also suitable for large tanks
with persistent soiling
• Active self-cleaning through Function video
www.lechler.com/de-en/
special nozzle geometry medialibrary/videos-
• Particularly low-maintenance general-industry
Or scan the QR code.

Series 5T5



Technical data:
Maximum Maximum Installation Bearing
operating temperature ambient temperature Operation in every Ball bearing
150 °C 150 °C installation position
150 °C (ATEX) 150 °C (ATEX)
Material Weight Surface quality Surface quality
Stainless steel 1.4404 4.0 kg Ra Ra ≤ 0.8 µm Ra Ra ≤ 1.6 µm
(316L), PTFE, PEEK, AUSSEN INNEN
EPDM or FKM
Steam suitability Insertion diameter Recommended filter Recommended
Suitable Ø 120 mm Line strainer with a mesh operating pressure
size of 0.2 mm/80 mesh 5 bar

Adapter Rotation monitoring Maintainable
1 1/2 BSPP is compatible Sensor-compatible
with HygienicFit


Max. tank diameter Duration of cleaning cycle
The specified maximum tank diameter applies to the
recommended operating pressure and is indicative only.
The type of soiling is also decisive for the cleaning result.
20 25
18
20
Max. tank diameter[m] 16
15
14
10
12 Cycle time[min]

10 5
8 0
0 1 2 3 4 5 6 0 2 4 6 8 10 12
Pressure [bar] 5T5.299 Pressure [bar] 5T5.299
5T5.279 5T5.279
5T5.259 5T5.259
Overview of maximum tank diameter 5T5.219 Duration of cleaning cycle 5T5.219
depending on pressure 5T5.149 depending on pressure 5T5.149

 Dimensions in mm.
Ø 38.3
1 1/2 BSPP Ø 8.15

15 39
25



231.3 250.3 Ø 145 Ø 145

Ø 120 Ø 120



Female thread Dimensions of slip-on connection Insertion diameter and Insertion diameter and
according to ASME-BPE interference circle diameter interference circle diameter
(OD tube) of the threaded connection of the slip-on connection

Spray Ordering no. Narrowest Quantity x Max.
V water [l/min]
angle Connection cross- Ø nozzle V water tank
section [mm] diameter
1 1/2" p [bar] (pmax = 15 bar)
Ø [m]
Type 1 1/2 slip-on
[mm]
BSPP connection at 5 bar
EPDM FKM EPDM FKM 2.0 3.0 5.0 10.0 [m³/h]]
360° 5T5.149.1Y AS 25 TF15 34 4.40 4 × 4.40 70 86 111 157 6.6 15.2
5T5.219.1Y AS 25 TF15 34 5.55 4 × 5.55 107 131 169 239 10.1 16.5
5T5.259.1Y AS 25 TF15 34 6.45 4 × 6.45 132 162 209 296 12.5 17.3
5T5.279.1Y AS 25 TF15 34 7.10 4 × 7.10 150 184 238 336 14.2 17.6
5T5.299.1Y AS 25 TF15 34 7.75 4 × 7.75 170 209 269 380 16.1 16.9
NPT threads on request.
Information on operation
Compressed air can be used only for a short time for blowing dry.
Use above the recommended pressure will have a negative effect on the cleaning
result and wear.

The plus
for large tanks with
persistent soiling

 Lechler GmbH · Precision Nozzles · Nozzle Systems
Ulmer Strasse 128 · 72555 Metzingen, Germany · Phone +49 7123 962-0 · info@lechler.de · www.lechler.com
Edition 09/24 · EN · PDFSubject to technical modifications or mistakes.